The application of lignin as renewable raw material in chemical industry

Marta Goliszek, Beata Podkościelna

Abstract


The overutilization of fossil fuels will inevitably cause the global environmental problems and dwindling of available resources. For that reason, identifying renewable sustainable alternatives has attracted an increasing attention. Lignocellulosic biomass has been considered to be one of the most logical feedstock to replace traditional fossil resources as one of the most accessible renewable forms of carbon. One of the primary components of lignocellulosic biomass, next to hemicellulose and cellulose is lignin. It is a by-product in paper and pulp industry. Lignin is mainly used as fuel directly, without further utilization which is suggested to be a waste of natural resources. With this purpose, the valorization of lignin into value-added products needs particular attention of researchers. This review article focuses on chosen possible applications of lignin in chemical industry.


Keywords


lignin; carbon fibre; phenols; vanillin; polymers

Full Text:

PDF

References


M. Q. Zhang, M. Z. Rong and X. Lu, Comp. Sci. Tech., 65 2514-2525 (2005).

V. K. Thakur, M. K. Thakur, P. Raghaven and M. R. Kessler, ACS Sustainable Chem. Eng., 2 1072-1092 (2014).

W. Yang, J. M. Kenny and D. Puglia, J. Ind. Crop., 74 348-356 (2015).

A. K. Mohanty, M. Misra and L. T. Drzal, J. Polym. Environ., 10 19-26 (2002).

H. Wang and H. Z. Chen, J. Chin. Inst. Chem. Eng., 38 95-102 (2007).

J. Li, Y. He and Y. Inoue, Polym. Int. 52 949-955 (2003).

S. Kadem, R. Irinislimane and N. Belhaneche-Bensemra, J. Polym. Environ., 26 3086–3096 (2018).

R. V. Gadhave, P. A. Mahanwar and P. T. Gadekar, Open J. Polym. Chem., 8 1-10 (2018).

A. R. Xu, L. Chen, X. Guo, Z. Xiao and R. Liu, Int. J. Biol. Macromol, 115 846-852 (2018).

H. Huang, Ch. Han, G. Wang and Ch. Feng, Electrochim. Acta, 259 637-646 (2018).

S. Zhao and M. M. Abu-Omar, ACS Sustainable Chem. Eng., 5 5059-5066 (2017).

N. E. E. Mansouri and J. Salvado, J. Ind. Crop., 24 6-16 (2006).

A. Tejado, C. Peña, J. Labidi, J. M. Echeverria and I. Mondragon, Bioresource Technol., 98 1655-1663 (2007).

R. E. Hage, N. Brosse, L. Chrusciel, Ch. Sanchez, P. Sannigrahi and A. Ragauskas, Polym. Degrad. Stab., 94 1632-1638 (2009).

R. Whetten and R. Sederoff, Plant Cell, 7 1001-1013 (1995).

A. Rahimi, A. Ulbrich, J. J. Coon and S. S. Stahl, Nature, 515 249-252 (2014).

X. Huang, T. I. Korányi, M. D. Boot and E. J. M. Hensen, Green Chem., 17 4941-4950 (2015).

D. J. Johnson, I. Tomizuka, O.Watanabe, Carbon, 13 321-325 (1975).

P. Azadi, O. R. Inderwildi, R. Farnood and D. A. King, Renew. Sust. Energ. Rev., 21 506-523 (2013).

M. Kleinert and T. Barth, Chem. Eng. Technol., 31 736-745 (2008).

F. G. Calvo‐Flores and J. A. Dobado, ChemSusChem, 3 1227-1235 (2010).

J. D. P. Araújo, C. A. Grande and A. E. Rodrigues, Chem. Eng. Res. Des. 88 1024-1032 (2010).

I. Kühnel, J. Podschun, B. Saake and R. Lehnen, Holzforschung, 69 531-538 (2015).

D. Feldman, M. Lacasse and L. M. Beznaczuk, Prog. Polym. Sci., 12 271-276 (1986).

O. D. Mante, J. A. Rodriguez, S. P Babu, Bioresource Technol., 148 508-516 (2013).

A. Yerrayya, D. V. Suriapparao, U. Natarajan and R. Vinu, Bioresource Technol., 270 519-528 (2018).

X. Ma, Y. Tian, W. Hao, R. Ma and Y. Li, Appl. Catal., A., 481 64-70 (2014).

T. Yoshikawa, T. Yagi, S. Shinohara, T. Fukunaga, Y. Nakasaka, T. Tago and T. Masuda, Fuel Process. Technol. 108 69-75 (2013).

D. R. Naron, F.-X. Collard, L. Tyhoda and J. F. Görgens, J. Anal. Appl. Pyrolysis, 138 120-131 (2019).

M. Fache, B. Boutevin and S. Caillol, ACS Sustainable Chem. Eng., 4 35-46 (2016).

Y. Wang, S. Sun, F. Li, X. Cao and R. Sun, Ind. Crops Prod. 116 116-121 (2018).

G. Wu, M. Heitz and E. Chornet, Ind. Eng. Res., 33 718-723 (1994).

C. Isola, H. L. Sieverding, A. M. Numan-Al-Mobin, R. Rajappagowda, E. A. Boakye, D. E. Raynie, A. L. Smirnova and J. J. Stone, Int. J. Life Cycle Assess., 23 1761-1772 (2018).

O. P. Bahl, Z. Shen, J. G. Lavin and R. A. Ross, in: Carbon Fibers (J. B. Donnet, T. K. Wang, J. C. M. Peng and S. Reboulliat, Eds), Vol. 1, Marcel Dekker, New York, p. 1-83, 1998.

G. Gellerstedt, E. Sjöholm and I. Brodin, Open Agric. J., 3 119-125 (2010).

O. Sevastyanova, W. Quin and J. F. Kadla, J. Appl. Polym. Sci., 117 2877-2881 (2010).

US Patent Application 2011285049, 2011.

D. A. Baker and T. G. Rials, J. Appl. Polym. Sci., 130 713-728 (2013).

W. Thielemans, E. Can, S. S. Morye and R. P. Wool, J. Appl. Polym. Sci., 83 323-331 (2002).

C. Jiang, H. He, H. Jiang, L. Ma and D. M. Jia, Express Polym. Lett., 7 480-493 (2013).

B. Podkościelna, M. Goliszek and O. Sevastyanova, Pure Appl. Chem., 89 161-171 (2017).

M. Goliszek, B. Podkościelna and O. Sevastyanova, K. Fila, A. Chabros, P. Pączkowski, Cellulose, 123 910-922 (2019).

K. Bula, Ł. Klapiszewski and T. Jesionowski, Polym. Composite., 36 913-922 (2015).

J. F. Kadla and S. Kubo, Compos. Part A., 35 395-400 (2004).

S. Kubo and J. F. Kadla, Macromolecules, 37 6904–6911 (2004).

O. Gordobil, I. Egüés, R. Llano-Ponte and J. Labidi, Polym. Degrad. Stab., 108 330-338 (2014).

F. Chen, H. Dai, X. Dong, J. Yang and M. Zhong, Polym. Composite., 32 1019-1025 (2011).

D. Kun and B. Pukánszky, Eur. Polym. J., 93 618-641 (2017).

B. Podkościelna, M. Sobiesiak, Y. Zhao, B. Gawdzik and O. Sevastyanova, Holzforschung, 69 769-776 (2015).

M. Goliszek, B. Podkościelna, K. Fila, A. V. Riazanova, S. Aminzadeh, O. Sevastyanova and V. M. Gun’ko, Cellulose, 25 5843–5862 (2018).

Y. Li, M. Wu, B. Wang, Y. Wu, M. Ma, and X. Zhang, ACS Sustainable Chem. Eng., 4 5523–5532 (2016).

M. Goliszek, M. Sobiesiak, K. Fila and B. Podkościelna, Adosorption, (2019). https://doi.org/10.1007/s10450-019-00008-6

Y. Ge, L. Qin and Z. Li, Mater. Design, 95 141-147 (2016).

R. W. Thring, M. N. Vanderlaan and S. L. Griffin, Biomass Bioenerg., 13 125-132 (1997).

Y. Li and A. J. Ragauskas, J. Wood Chem. Technol., 32 210-224 (2012).

P. Cinelli, I. Anguillesi and A. Lazzeri, Eur. Polym. J., 49 1174-1184 (2013).

C. A. Cateto, M. F. Barreiro and A. E. Rodrigues, Ind. Crop. Prod., 27 168-174 (2008).

J. Bernardini, P. Cinelli, I. Anguillesi, M. B. Coltelli and A. Lazzeri, Eur. Polym. J., 64 147-156 (2015).

V. K. Thakur and M. K. Thakur, Int. J. Biol. Macromol., 72 834-847 (2015).

D. Ciolacu, A. M. Oprea, N. Anghel, G. Cazacu and M. Cazacu, Mater. Sci. Eng. C., 32 452-463 (2012).

W. K. El-Zawawy, Polym. Adv. Technol., 16 48-54 (2005).

I. E. Raschip, G. E. Hitruc, C. Vasile and M. C. Popescu, Int. J. Biol. Macromol., 54 230-237 (2013).

Q. Feng, F. Chen and H. Wu, BioResources, 6 4942-4952 (2011).

L. Perez-Cantu, F. Liebner and I. Smirnova, Micropor. Mesopor. Mat., 195 303-310 (2014).

L. I. Grishechko, G. Amaral-Labat, A. Szczurek, V. Fierro, B. N. Kuznetsov, A. Pizzi and A. Celzard, Ind. Crop. Prod., 41 347-355 (2013).

D. K. Setua, M. K. Shukla, Vineeta Nigam, Harjeet Singh and G. N. Mathur, Polym. Composite., 21 988-995 (2000).

W. Thielemans and R. P. Wool, Compos. Part A: Appl. Sci. Manuf., 35 327-338 (2004).

K. Bula, Ł. Klapiszewski and T. Jesionowski, Polym. Composite., 36 913-922 (2015).

A. Lee and Y. Deng, Eur. Polym. J., 63 67-73 (2015).

S. Quraishi, M. Martins, A. A. Barros, P. Gurikov, S. P. Raman, I. Smirnova, A. R. C. Duarte and R. L. Reis, J. Superctit. Fluids, 105 1-8 (2015).




DOI: http://dx.doi.org/10.17951/aa.2018.73.1.31-40
Date of publication: 2019-11-06 00:00:00
Date of submission: 2019-04-16 19:06:55


Statistics


Total abstract view - 1249
Downloads (from 2020-06-17) - PDF - 728

Indicators



Refbacks

  • There are currently no refbacks.


Copyright (c) 2019 Marta Goliszek, Beata Podkościelna